Sennheiser RS 2000

Specialist Wireless headset for the television

The elegant Sennheiser RS 2000 is a smart listening device. It’s designed to deliver TV sound with renowned Sennheiser quality at the volume you desire to enhance the listening experience.

Enhanced TV sound

The RS 2000 delivers superior Sennheiser sound quality for TV watching. High output capability with left and right volume controls to balance sound improves your listening experience.

Wireless Freedom

Digital technology provides wireless freedom and crystal clear sound within a range of up to 150 feet. The built-in rechargeable battery provides up to 9 hours of playing time for extended TV watching sessions.

Elegant design

The sleek and attractive base station transmitter of the RS 2000 is a stylish addition to every home entertainment system. It serves as a smart docking station letting the headset/receiver lie in a compact horizontal position when charging the durable integrated battery.

Ease of use

The RS 2000 is easy to use. The system automatically turns on when placed in your ears and switches off when not being used. The integrated battery is charged when placed in the base station and the system reminds you when it’s time to recharge.

Features:

• Dimensions receiver 102 mm x 265 mm x 23 mm
• Frequent response 15 hz to 16 kHz
• Max. sound pressure level 125 dB (at 1kHzm 1Veff)
• THD, total harmonic distortion <0.5% at 1 kHz, 100 dB SPL
• Contact pressure approx. 0.8N
• Ear coupling Silicon rubber
• Plug male power supply: straight/yellow and 3.5 mm audio: 1x straight and 1x angled / blue
• Cable length 1.5m power supply and 1.5m Jack 3.5mm cable
• Receiver weight: approx. 60g
• Transmitter weight: 230g
• Charging time up to 3 hours
• Fast charging: 30 minutes of charging during 2 hours of operation
• Distance up to 50 m / 150 feet
• Energy consumption operation: type. 1 W and standby: ≤0.5 W (without load)
• Analog input signal/noise ratio: type 85 dBA to 1 Vrms
• Max RF output power 10 dBm Class 1
• Operating time up to 9 hours
• Receiver power supply: built-in rechargeable lithium-polymer battery BAP 800, 3.7 V, 350 mAh and transmitter: 5 V, 600 mA
• Battery specification BAP 800, 3.7 V, 350 mAh
• Frequency 2.4 – 2.48 GHz
• Power Repeater: Auto On / Off
• Transducer (headphone) dynamic principle, neodymium magnets
• Analog input connection: 3.5 mm female connector
• Input voltage range: 0.15 … 4.0 Vpk
• Latent state <60msec
• LED battery status monitor
• Maximum number of receivers connected 2